通化沦笨娱乐有限公司

Name：DRL-V Thermal Conductivity Tester(Heat flux) （Upgrade）Description：It is mainly used to measure the thermal resistance of thin thermal conductor, solid electrical insulating material, thermal conductive silicone, resin, rubber, beryllium oxide ceramic, alumina ceramic, contact thermal resistance at solid interface and thermal conductivity of materials. The detection material is solid sheet, and the frame can detect powder state material and paste material。 Reference Standards for instruments：MIL-I-49456AInsulation sheet, thermal conductive resin, thermal conductive glass fiber reinforcement；GB/T 5598-2015Method for determination of thermal conductivity of beryllium oxide ceramics；GB/T 29313—2017 Test methods for thermal conductivity of electrical insulating materials;ASTM D5470-2017Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials。

Name：DRL-III Thermal Conductivity Tester(Heat flux) （Upgrade）Description：It is mainly used to measure the thermal resistance of thin thermal conductor, solid electrical insulating material, thermal conductive silicone, resin, rubber, beryllium oxide ceramic, alumina ceramic, contact thermal resistance at solid interface and thermal conductivity of materials. The detection material is solid sheet, and the frame can detect powder state material and paste material。 Reference Standards for instruments：MIL-I-49456AInsulation sheet, thermal conductive resin, thermal conductive glass fiber reinforcement；GB/T 5598-2015Method for determination of thermal conductivity of beryllium oxide ceramics；GB/T 29313—2017 Test methods for thermal conductivity of electrical insulating materials;ASTM D5470-2017Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials。

Name：DRH-Ⅱ coefficient of thermal conductivity tester (the hot plate method)Description：This instrument based on stable thermal conductive principle, one-way when sample, the two sides are in different stable temperature measurement, the heat transfer area through effective heat flow and surface temperature difference between the two, and thickness calculation coefficient of thermal conductivity.

Name：DRE-V Multifunction Rapid Thermal Conductivity Tester （ HotDisk）Description： The instrument uses the Hot Disk method, based on TPS technology, using a Hot Disk probe。advantage： 1.Directly measuring heat propagation can save a lot of time； 2.Will not be affected by contact thermal resistance like static method； 3.No special sample preparation is required, only a relatively flat sample surface is required for solid materials. Different types of materials adopt different testing schemes and computational mathematical models, which have advantages such as fast measurement speed, wide applicability, and the ability to successfully avoid the influence of natural convection during the experimental process. The advantages of wide range of actual testing materials, wide range of thermal conductivity, simple sample processing, and fast testing speed are currently popular testing methods.Equipment reference standards：ISO 22007-2:2008, GB/T32064-2015.

Name：DRE-III Multifunction Rapid Thermal Conductivity Tester （ HotDisk）Description：The instrument uses the Hot Disk method, based on TPS technology, using a Hot Disk probe。advantage： 1.Directly measuring heat propagation can save a lot of time； 2.Will not be affected by contact thermal resistance like static method； 3.No special sample preparation is required, only a relatively flat sample surface is required for solid materials. Different types of materials adopt different testing schemes and computational mathematical models, which have advantages such as fast measurement speed, wide applicability, and the ability to successfully avoid the influence of natural convection during the experimental process. The advantages of wide range of actual testing materials, wide range of thermal conductivity, simple sample processing, and fast testing speed are currently popular testing methods.Equipment reference standards：ISO 22007-2:2008, GB/T32064-2015.

Name：DRH-V Automatic dual flat-panel thermal conductivity detector (guarded hot plaDescription： DRH-V automatic double flat thermal conductivity detector is based on the principle of unidirectional stable thermal conductivity, when the specimen, the lower sides in different stable temperature, measured by the sample effective heat transfer area of ??the heat flow and sample temperature difference between the two surfaces and thickness, calculated thermal conductivity. Meet the high-precision test requirements of the the material detection research department of the thermal conductivity of the material. My company independent research and development of electronic circuits, computer software for the whole process of automatic monitoring and control. This machine has a computer automatic thickness measurement, automatic compression, measuring the thermal conductivity pressure. Automatic data acquisition, data processing, print reports, and data storage. Measuring short time, accurate data, good repeatability, high degree of automation.

Name：DRL-II Thermal conductivity meterDescription：Description：This instrument mainly tests thin heat conductor, solid electric insulating material, heat conduction resin, oxidizes the beryllium porcelain, oxidizes coefficient of ceramic heat conduction such as the aluminium porcelain to determine. The instrument consults the standard: MIL-I-49456A (insulating stretch of material, heat conduction resin, thermal conductance glass are strengthened finely); GB 5598-85 (oxidize beryllium porcelain heat conduction coefficient and determine the method); D5470-95 (the test standard of performance that thin thermal conductance solid electric insulating material conducts heat),etc.. Apply to large and medium universities and colleges extensively, R&D institution, quality testing department and material for producing factory analyze that measures. main parameter

Name：DRX-II Hotline thermal conductivity meterDescription：the law of hot line that one kind measures the law (not a law of steady state) dynamically. Principle its to measure along sample length direction burying underground in sample centre line shape Wen Sheng for a fixed period of time of heat source.

Name：DRH-II Thermal conductivity testerDescription：

Name：DRM-IIThermal conductivity testerDescription：

Name：DRS-Ⅱheat conductivity tester (discharge of water flat band method)Description：this instrument is suitable for the fireproof heat preservation, the ceramic fibre, the felt, spins materials and so on fabric, board, brick under the different temperature the thermal conductivity test. Meet standards YB/T 4130-2005 fire-proof material thermal conductivity testing method (discharge of water flat band method), GB/T 17911 refractory ceramics textile fiber product thermal conductivity experimental technique and so on. Widespread application in major and medium colleges and universities, Scientific research Unit, quality testing department and plant material analysis examination.

Name：DRJ-IImetal high temperature thermal conductivity testerDescription：this instrument uses the test specimen direct circular telegram longitudinal heat flow law, is suitable surveys the metal in 80°~900℃ the temperature range not to have under the transformation temperature the thermal conductivity, completes the test automatically by the computer. Has satisfied the material examination Research department to the metallic material thermal conductivity test request. Instrument reference standard: GB/T3651-83 "Metal High temperature Thermal conductivity Measuring technique".

Name：CRM-II Regenerative coefficient testerDescription：

Name：SMDR Meter temperature thermal conductivity of the graphite materialDescription：

Name：Concrete thermal conductivity detectorDescription：

Name：WDT-IIDifferential thermal analyzerDescription：

Name：BRR-II/III Increasment testerDescription：BRR increasment tester The measuring device increasment by cooling method. For those uneven quality of soil characteristics, in the amount of sampling on fully considered the representative. In the sample center can be measured accurately, insert thermocouple sample of heat transfer process, and the temperature numerical comparison, can judge thermocouple temperature after heat transfer to balance. The device adopts the high accuracy of measurement temperature highlighted.it thermocouple and watch, to ensure the accuracy of measurement.

Name：heat conductivity tester (plate heat flow meter law)Description：this instrument uses internationally the popular heat flow meter examination thermal conductivity and the thermal resistance method, matches the computer to realize the completely automatic examination, the production test report. Uses simulates the aluminum alloy molding actual service condition to carry on the test, faces in the molding joins the stable fire surface temperature openly, the quantity of heat transmits (room temperature) grimly through the molding, the survey transmission"s heat flow may calculate the thermal conductivity and the thermal resistance. The molding environment uses the natural air environment, with the aluminum alloy molding actual use environment match case, the thermal conductivity which and the thermal resistance data obtains not can only judge the aluminum alloy molding accurately the heat-transfer property, moreover provides the powerful data support for the reality engineering design computation. this test method is simple, quick, the duplication is good. Is suitable for the molding heat transfer aspect research and the development. May also use in tests and so on plastic, rubber, graphite, thermal insulation material, widespread application in universities, colleges and institutes, scientific research courtyard, quality testing, factories and mines. this instrument reference standard: ASTM C518-04 uses the heat flow meter law determination stable state heat flux and the heat transfer characteristic testing method.

Name：Thermal expansion coefficient locatorDescription：The apparatus is used to measure temperature in the state of metal materials, ceramics, masks, fire-proof material and other non-metallic materials in the process of being heated roast expansion and contraction performance, also apply to the ceramic tiles GB/T3810.8-1999 linear thermal expansion tests.

Name：Thermal expansion coefficient locatorDescription：

Name：High temperature vertical dilatometer, thermal expansion coefficient of instrumeDescription：

Name：Horizontal dilatometer high temperatures (thermal expansion coefficient tester)Description：

Name：Intelligent high-pressure high-temperature clay dilatometerDescription：

Name：Hot expand coefficient measure instrument (high-temperature horizontal expansionDescription：The apparatus is used to measure temperature in the state of metal materials, ceramics, masks, fire-proof material and other non-metallic materials in the process of being heated roast expansion and contraction performance, also apply to the ceramic tiles GB/T3810.8-2006 linear thermal expansion tests.

Name：PCY-D Low-temperature dilatometerDescription：

Name：GKF-VIII Chemical analyzerDescription：Chemical analyzer

Name：DHF82 Chemical analyzerDescription：

Name：SJY Material high temperature character measure instrumentDescription：The shape measurement instruments applicable to the materials, metals, non-metallic materials sinter point temperature, a high temperature went refractoriness projection devices. The equipment materials through optical devices observation volume contraction in the heating process, expansion, except, of the flow-ball situation, the scope and measurement materials sinter melting temperature range performance.

Name：SKZ-10000A Ceramics brick crack modulus measure instrumentDescription：SKZ-10000A Ceramics brick crack modulus measure instrument The machines use hydraulic or pneumatic systems, even included. Meet GB/T3810.4-2006， ceramic tiles-fracture module and damage intensity measurement, but also widely used underground, tiles， construction sanitary ware, electrical porcelain, and daily ceramics, fire-proof material, and other products fracture module and damage intensity measurement. Replacement of fixtures could also be used for performance measurement parameters resistance broken.

Name：WM Unglaze wear-resisting instrumentDescription：The machines meet GB/T3810.6-2006, applies to non-glazed pottery tiles, mosaics, and other products wear-resistance testing.

Name：Bibulous rate testerDescription：The machines meet GB/T3810.3-2006， using vacuum France to daily ceramics, sanitary ceramics construction, electricity porcelain, the fire-proof material water absorption, apparent porosity, apparent relative density measurements.

Name：SQ005 Thermal shock resistance meterDescription：The machines meet GB/T3810.9-2006， applied to the measurement of ceramic tiles resist heat Zhen.

Name：TKL ceramic glaze brick bear glaze crack character measure instrument ( flame)Description：

Name：KS-B microcomputer plasticity measure instrumentDescription：

Name：TZY Comprehensive degrees instrumentDescription：

Name：SQ006 bear hot & shake character measure instrumentDescription：

Name：Ceramics for daily impact testerDescription：

Name：LM Ceramic glaze face bear grind measure instrumentDescription：The machines meet GB/T3810.7-2006， applied to the measurement of glazed ceramic tiles wear-resistance.

Name：Coefficient of friction testerDescription：

Name：Ceramic tile frost resistance testerDescription：

Name：Ceramic tile thickness measuring instrumentDescription：

Name：Impact test instrumentDescription：

Name：Wet expansion instrumentDescription：

Name：ceramic tile linear heat expansion meterDescription：Hot expand coefficient measure instrument (high-temperature horizontal expansion device)

Name：Handheld colorimeterDescription：

Name：Automatic whiteness meterDescription：

Name：Manual blank bending instrumentDescription：

Name：KGZ－1CSmart glossiness measure instrumentDescription：The instrument applicable to ceramics, stones, paint, paper, plastics, metal etc. graphic luster degrees for testing to meet GB/T3891-92 construction materials pertaining to the luster mirror for measurement methods.

Name：Smart Citai transmittance instrumentDescription：

Name：Golden abrasion instrumentDescription：

Name：Density measure instrument（needle in-degree instrument）Description：PM Density measure instrument（needle in-degree instrument） The main instruments for measuring body shape tight-density ceramic adobe performance.

Name：SKZ-10000A Ceramics brick crack modulus measure instrumentDescription：The machines use hydraulic or pneumatic systems, even included. Meet GB/T3810.4-2006， ceramic tiles-fracture module and damage intensity measurement, but also widely used underground, tiles， construction sanitary ware, electrical porcelain, and daily ceramics, fire-proof material, and other products fracture module and damage intensity measurement.

Name：Digital display type bending strength testerDescription：

Name：SLW-I Carbon (graphite) tensile strength testerDescription：

Name：SMDR Graphite thermal conductivity meterDescription：

Name：PCY Meter of the coefficient of thermal expansion of the carbon (graphite)Description：

Name：SGW-II Carbon (graphite) flexural strength / compressive strength testerDescription：

Name：GDT-II Carbon (high temperature) resistivity testerDescription：

Name：GKZ-II High temperature bending instrumentDescription：

Name：SGW high performance ceramic flexural strength temperature instrumentDescription：

Name：Carbon (graphite) material testing instruments ListDescription：

Name：GTM high performance ceramics elastic modules measure instrumentDescription：

Name：The porous ceramics pore diameter testerDescription：

Name：Dynamic method (high-temperature) elastic modulus testerDescription：

Name：porous ceramics ventilation degrees measure instrumentDescription：

Name：porous ceramic permeability measure instrumentDescription：

Name：porous ceramics apparent porosity and bulk density measure instrumentDescription：

Name：SJY Material high temperature character measure instrumentDescription：SJY Material high temperature character measure instrument

Name：SQW-Ahigh-temperature materials intensity measure instrumentDescription：SQW—A high-temperature materials intensity measure instrument

Name：A few explicit material temperature bending deviceDescription：

Name：Material carry weight intenerate temperature instrumentDescription：CHYMaterial carry weight intenerate temperature instrument

Name：Thermal shock resistance instrumentDescription：

Name：A high-temperature melt viscometerDescription：

Name：adobe moisture meter (contact type)Description：

Name：Rapid moisture analyzerDescription：

Name：resistance temperature property cryoscopeDescription：

Name：Glass crystallization furnaceDescription：

Name：RH-IGlass softening point testerDescription：

Name：The SB hand move type liquid inhibits the kind machineDescription：

Name：8411 type electricities move to flap the machine of griddleDescription：That machine can go together with the square pore, circle pore standard griddle of each specification, is an essential equipments in laboratory, a griddle from 20 eyes to 325griddle choose at will.

Name：QMJseries ball whets machineDescription：

Name：planets speediness grind machineDescription：XM-4planets speediness grind machine：500g×2、250g×2

Name：speediness grind machineDescription：That machine is a kind of speediness, the ideal laboratory that save time grind equipments. Run smoothly, do not need to set up , can place at will to run them.

Name：Vacuum mud-making machineDescription：The equipment mainly applicable to the mining industry ceramics industry, scientific research institutes and institutions of higher learning as a training laboratory soil use.

Name：The SB hand move type liquid inhibits the kind machineDescription：It is extensive to used for the porcelain and ceramics, building materials, chemical engineering...etc. professional laboratory, the operation is simple and save energy.

Name：SlicerDescription：

Name：Jaw crusherDescription：

Name：porcelain bottle whets the machineDescription：That machine is an ideal equipments that porcelain and ceramics, chemical engineering industry laboratory is thin to whet

Name：KSX2 full-fibre erengy-saving celerity raise temperature box resistance stoveDescription：

Name：Kl series of experiments revolve Road heating stovesDescription：

Name：FN101 series electricity hot blast drying ovenDescription：series electricity hot blast drying oven

Name：Lift resistance furnaceDescription：

Name：SG3 high temperature melting stove1000℃、1200℃、1350℃、1600℃）Description：

Name：GSX Series of energy-efficient high-temperature sintering electric furnaceDescription：

Name：SXT gradient electric stove（1350℃、1650℃）---Description：

Name：high temperature tube ambience stoveDescription：

Name：SX2series box resistance stove（1000℃、1200℃、1350℃、1600℃）Description：Uses : apply to the equipment used to bake laboratory samples and are also available for small batches.

Name：DRPL-II Thermal conductivityDescription：

Name：CRM-IIRegenerative coefficient testerDescription：

Name：BRR-II/III increasment testerDescription：The measuring device increasment by cooling method. For those uneven quality of soil characteristics, in the amount of sampling on fully considered the representative. In the sample center can be measured accurately, insert thermocouple sample of heat transfer process, and the temperature numerical comparison, can judge thermocouple temperature after heat transfer to balance. The device adopts the high accuracy of measurement temperature highlighted.it thermocouple and watch, to ensure the

Name：WDT-II Differential thermal analyzerDescription：

Name：The molding sand high-temperature strength tester (modeling materials, high-tempDescription：

Name：The type shell high temperature deformation testerDescription：

Name：The type shell high temperature flexural strength testerDescription：

Name：Direct reading permeability testerDescription：

Name：Grinding wheel moistened sand machineDescription：

Name：Hydraulic strength testing machineDescription：

Name：Hammer system prototypeDescription：

Name：Material high temperature character measure instrumentDescription：(video-sinter point testing devices, high-temperature microscopes) The shape measurement instruments applicable to the materials, metals, non-metallic materials sinter point temperature, a high temperature went refractoriness projection devices. The equipment materials through optical devices observation volume contraction in the heating process, expansion, except, of the flow-ball situation, the scope and measurement materials sinter melting temperature range performance.

Name：Electronic universal testing machine (desktop)Description：

Name：Electronic universal testing machine (gantry)Description：

Name：Hydraulic universal testing machineDescription：

Name：Testing machine sets special fixtureDescription：

Name：Electronic tensile testing machine (single column)Description：