Hotline
86+0731-58534888,86+13607322318
Hotline:86+ 0731-58534888 86+ 13607322318
The current position:Home > Products > Differential thermal analysis > CRM-IIRegenerative coefficient tester
CRM-IIRegenerative coefficient tester
- ProductModel：CRM-II
- Product time：2019/7/17 0:00:00
- Description：
RELATED ARTICLES
Introduction
I. Overview
The instrument is characterized by: the device is simple, accurate, test test speed (ten minutes), in one test simultaneously measured regenerative coefficient, thermal conductivity, the thermal conductive coefficient and specific heat, and can be measuring the thermophysical properties under different moisture status.
Suitable insulation materials, concrete materials, plastics, rubber, graphite, and inorganic materials such detection. Reference standard: JGJ31-2002 lightweight aggregate concrete technical regulations and JG158-2004 "powder particles of polystyrene exterior wall external insulation system."
Second, the main technical performance
1, the range of applications:
This instrument is suitable for the determination of the homogeneous plate-dry or different moisture conditions, jelly, powdered materials, thermal conductivity, heat storage coefficient, thermal diffusivity and specific heat. The thermal conductivity of the material being tested range of 0.1 ~ 30w/m2.k
2, the power supply ~ 220V, 50HZ
Dimensions (L × W × H) 600 × 400 × 1520 (mm)
4, working conditions
10 ~ 35 ℃ ② ① ambient temperature ≤ 80% relative humidity
③ room temperature stability of ≤ ± 1.5 ℃
5, the measurement accuracy of ± 1%
6, CRM-II connected to a computer, computer automated test, data printout. Provide a set of software
The instrument is characterized by: the device is simple, accurate, test test speed (ten minutes), in one test simultaneously measured regenerative coefficient, thermal conductivity, the thermal conductive coefficient and specific heat, and can be measuring the thermophysical properties under different moisture status.
Suitable insulation materials, concrete materials, plastics, rubber, graphite, and inorganic materials such detection. Reference standard: JGJ31-2002 lightweight aggregate concrete technical regulations and JG158-2004 "powder particles of polystyrene exterior wall external insulation system."
Second, the main technical performance
1, the range of applications:
This instrument is suitable for the determination of the homogeneous plate-dry or different moisture conditions, jelly, powdered materials, thermal conductivity, heat storage coefficient, thermal diffusivity and specific heat. The thermal conductivity of the material being tested range of 0.1 ~ 30w/m2.k
2, the power supply ~ 220V, 50HZ
Dimensions (L × W × H) 600 × 400 × 1520 (mm)
4, working conditions
10 ~ 35 ℃ ② ① ambient temperature ≤ 80% relative humidity
③ room temperature stability of ≤ ± 1.5 ℃
5, the measurement accuracy of ± 1%
6, CRM-II connected to a computer, computer automated test, data printout. Provide a set of software
-----------------------------------------
Order
Related products：
The last product: BRR-II/III increasment tester
The next product: DRPL-II Thermal conductivity
Technical support：www.chem17.com Management
Xiangtan Xiangyi Instrument Co., Ltd. Copyright 2019 備案號：湘ICP備09004773號-1 GoogleSitemap